CNC lathe manufacturers explain the common five reasons for lathe leakage

When the CNC lathe is running, sometimes there may be electrical leakage, which is a serious equipment malfunction and can easily cause injury to personnel. In this situation, we must stop the machine and cut off the power to check the equipment first, identify the cause of the electrical leakage, and then take corresponding measures. Today, our CNC lathe manufacturer will explain to you the five common causes of lathe electrical leakage.

1. Power supply issue

The power supply issue of the CNC turntable may be one of the reasons for leakage. Perhaps the power supply voltage is too low or too high, or the power supply circuit is unstable. These issues can all lead to excessive or unstable current, resulting in leakage phenomena.

2. Insulation issues

The insulation problem of the CNC turntable may also be the cause of electrical leakage. If the insulation material of the equipment ages or is damaged, current may flow through the material to other components, causing leakage. In this case, it is necessary to replace the insulation material in a timely manner.

3. Grounding issues

The grounding problem of the CNC turntable may also cause leakage. If the grounding circuit of the equipment is poor or the grounding resistance is too high, current may flow through other components to the human body or other equipment, leading to leakage. In this case, it is necessary to check the grounding circuit of the equipment and repair it in a timely manner.

4. Equipment aging

After prolonged use, CNC turntable equipment may experience aging issues. For example, the insulation materials and wires inside the equipment may age or be damaged, leading to electrical leakage. In this case, it is necessary to replace the aging components in a timely manner.

5. Improper operation

Improper operation may also cause electrical leakage in the CNC turntable. For example, operators may accidentally damage the insulation materials or grounding lines of the equipment, or improperly connect the power lines of the equipment. In this case, it is necessary to train the operators and establish correct operating procedures.

The above are the five common reasons for lathe leakage explained by CNC lathe manufacturers. We hope that the above explanation can be helpful for everyone in using CNC lathes in the future.